IT
EN

+39 0824 831680

Specifications

  • Continuous pure mica insulation with a low binding content.
  • Resistive winding with wire/metal strap made of nickel/crome 80/20.
  • Avaible with an incorporated thermocouple.
  • Test certificate.

Models

UGFI

Nozzle and hot mold heaters manufactured with galvanized steel sheet and collars. Power supply is Ni99% cable suitable for high temperatures at elevated mechanical resistance with very small overall dimensions.

Table size (mm) and power (W) standard

UGTS

Nozzle heater manufactured with a watertight compressed brass tubular. Power supply is given by a three-pole armoured cable. Conductor are made of Ni99% insulated by glass-teflon with a steel sheathing. They are particularly suited when there is liquid plastic or oil emission.

Table size (mm) and power (W) standard

Exit Electric

Know Ugelplus

UGFI

APPLICATIONS

  • For machines with operating temperatures of up to 350 ° C
  • For situations where space is narrow.

SUGGESTIONS FOR ASSEMBLY

  • Verify that the inner surface of the heater adheres perfectly.
  • Tighten the screws securely.
  • Re-tighten the screws securely after 30 minutes of operation to compensate for thermal expansion.

DIMENSIONS

  • The minimum size standards for implementation are specified in the table.

ELECTRICAL PARAMETERS

  • Maximum specific power 5W/cm2
UGTS

APPLICATIONS

  • For machines with operating temperatures of up to 280° C
  • Where there is risk of leakage of fluid or liquid materials.

SUGGESTIONS FOR ASSEMBLY

  • Verify that the inner surface of the heater adheres perfectly.
  • Tighten the screws securely.
  • Re-tighten the screws securely after 30 minutes of operation to compensate for thermal expansion.

DIMENSIONS

  • The minimum size standards for implementation are specified in the table.

ELECTRICAL PARAMETERS

  • Maximum specific power 4W/cm2